редкие материалы в розницу на редкие материалы в розницу

    Статьи по теме

    Molykote Separator Spray для ножей резки гофрокартона

    Molykote Separator Spray для ножей резки гофрокартона

    Продольная резка гофрированного картона на упаковочном производстве осуществляется с помощью специальных ножей. Их лезвия нуждаются в защите от налипания пыли и абразива. Для этих целей рекомендуется использовать смазку Molykote Separator Spray.

    Анаэробный герметик Permabond A1044 для резьбовых соединений, подверженных вибрациям

    Анаэробный герметик Permabond A1044 для резьбовых соединений, подверженных вибрациям

    Основной проблемой использования редукторов на производстве является сильная вибрация, которая приводит к расшатыванию и износу резьбовых соединений. Решить ее помогают специальные средства для надежной фиксации соединений, например, анаэробный герметик Permabond A1044. Он обладает прекрасной химической инертностью, не вытекает и не рассыхается, устойчив к высокому давлению.

    Mobil Isopar J

    Mobil Isopar J

    Europe - Middle East - Africa


    August 2004


    Performance Fluids

    Typical Properties

    Test Method


    Typical Value

    Distillation Range IBP 50% DP

    ASTM D 86-99


    185 189 204

    Flash point

    ASTM D 93



    Evaporation Rate, (n-BuAc=100)




    Evaporation Rate (Ether = 1)

    DIN 53170



    Density at 15°C

    ISO 12185



    KB Value

    ASTM D 1133



    Aniline Point

    ASTM D 611



    Aromatic content




    Bromine index




    Viscosity at 25°C

    ASTM D 445



    Surface tension at 25°C

    EC-M-F02 (Wilhemy plate)




    ASTM D 6045



    Refractive index at 20°C

    ASTM D 1218




    - This fluid typically contains less than 10 ppm benzene and less than 5 ppm sulphur

    - Values indicated describe typical physical properties and do not constitute specification limits

    ©2004 ExxonMobil. The user may forward, distribute, and/or photocopy this copyrighted document only if unaltered and complete, including all of its headers, footers, disclaimers, and other information. You may not copy this document to a Web site. ExxonMobil does not guarantee the typical (or other non-specification) values. Typical values only represent the values one would expect if the properties were tested in our laboratories with our test methods on the specified date. Some product properties are not frequently measured, and accordingly typical values may not be based upon a statistically relevant number of tests. Analysis may be performed on representative samples and not the actual product shipped. The information is this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. There is no warranty against patent infringement, not any endorsement of any product or process, and we expressly disclaim any contrary implication. The terms, "we", "our", "ExxonMobil Chemical", or "ExxonMobil" are used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliates they directly or indirectly steward. EXXONMOBIL, the ExxonMobil Emblem, the "Interlocking X" Device, EXXON, EXXSOL, ISOPAR, NAPPAR, NORPAR, SOLVESSO and VARSOL are trademarks of ExxonMobil.